language
English
ChineseAir compressor protection:
1. From the control object, it mainly involves the protection of the temperature, air pressure and oil pressure of the air compressor. When the oil pressure is low, it can automatically stop to ensure the use time of the air compressor.
2. From the device type.
What protection functions does the air compressor controller have?
Look at what kind of controller. The general air compressor controller protection functions include: phase sequence, phase loss, unbalance, overload inverse time characteristic protection, temperature, pressure and other protection functions.
What are the safety protection measures for air compressors
Should you be talking about an air pump?
1. Regularly release water
2. The belt tension should be appropriate
3. Be sure to install an air safety switch
4. The compression pressure should be suitable for your own use conditions and not too high or too low
4. The compression pressure should be suitable for your own use conditions and not too high or too low
Does air compressor protection mean cleaning the air conditioner?
Compressor protection, it will stop until it is switched on for a short time. There are 2 possibilities for shutdown protection. 1. Overheat protection (if the heat sink of the external machine is dirty, then it needs to be cleaned) 2. Overcurrent protection (mostly the internal system enters) Air, overloaded)
Reasons for air compressor overload protection
1. The motor is faulty 2. The air pressure is adjusted too high 3. The contact of the electromagnetic starter is out of phase 4. Check the check valve of the air tank
Air compressor protection switch old trip
(1) It is necessary to determine whether the trip refers to the bounce of the overload protector or the trip of the air switch in the power supply circuit. (2) If it is a circuit breaker tripping, first determine the size of the circuit breaker, determine whether it can bear the load of the machine, and whether the conversion is over.
(1) It is necessary to determine whether the trip refers to the bounce of the overload protector or the trip of the air switch in the power supply circuit. (2) If it is a circuit breaker tripping, first determine the size of the circuit breaker, determine whether it can bear the load of the machine, and whether the conversion is over.
Tel:86-574-62678766
E-mail:bzheng22@163.com
