language
English
Chinese1. Regularly check the air compressor accessories (1) In the shutdown state, open the plexiglass window of the chassis. 2) Check whether the balance iron pin is firm. 3) Check the surface finish of the internal parts for wear and lack of meat. (4) Use a wrench to pry the link parts between the balance irons to see if they are loose or eccentric. (5) Focus on illuminating the rotating parts with a flashlight to see if the gap is uniform and whether there is wear and oval. (6) Check the screws to see if they are loose. (7) Clean the oiler system in the chassis at the same time. (8) After the inspection, install the plexiglass window of the chassis. (9) Form records shall be made for each inspection, filled in item by item, once every three months, and two or more maintenance personnel shall sign and confirm on the inspection form.
2. Check the inside and outside of the chassis to see if there are cracks, and perform flaw detection if necessary.
3. Operation training for operators In addition to regular training, interactive links are added. Everyone communicates about problems found during operation, learns from each other, and continues to improve.
4. Installation responsibility system In the process of major and medium repairs, the installation quality supervision and maintenance quality responsibility system are carried out. Who installed each component is not only checked, but also recorded. During the operation process, once it is found that the installation quality appears If there is a problem, the responsible person can be found in time and help to find the cause.
5. Observation of air volume Observing the law of air usage during operation, pay attention to pressure changes during peak wind usage and low wind usage, especially the instantaneous high pressure phenomenon, to prevent the increase of equipment fatigue strength caused by high pressure. Large, and the chassis accident caused by the loose fasteners caused by the continuous occurrence of this phenomenon.
6. Repair of wearing parts All kinds of wearing parts should be regularly repaired or replaced, and they should be found and dealt with in time to avoid running with diseases.
Tel:86-574-62678766
E-mail:bzheng22@163.com
